PETCO® Concrete Block Lintels
For 4-in., 6-in., 8-in., 10-in., or 12-in. cement block
This cambered section, which was developed by PETCO®, has been found by actual test to be about twice as strong as most lintels on the market today. By raising the center higher than the ends, twice as much load can be applied before lintel is brought back to a horizontal position.
Eliminate excessive cutting away of block. Get by with less expense, one 8-inch block instead of two 4-inch blocks. Labor saver as well as money saver. Sash fits into groove or lintel where it can be caulked in place. The PETCO® block lintel is cambered about 1/4-inch to a foot to compensate for dead loads that lintels generally have to resist when wet masonry is put on them.
| Concrete Block Lintel Standard Sizes |
for 4-in.
block |
for 6-in.
block |
for 8-in.
block |
for 10-in.
block |
for 12-in.
block |
4x30 4x36 4x42 4x48 4x54 4x60 |
6x36 6x42 6x48 6x54 6x60 |
8x30 8x36 8x42 8x48 8x54 8x60 |
10x36 10x42 10x48 10x54 10x60 |
12x36 12x42 12x48 12x54 12x60 |
Formed Brick Lintels 3-1/2 in. x 3-1/2 in.
11 gauge formed brick lintels. The formed lips make a place for the mortar to lay and make a neat-appearing joint. All surfaces of the angle are coated with rust inhibitant lead-free green enamel by the dripping process.
Available in lengths from 18-in. to 60-in., in 6-inch increments
Angle Lintels
3-1/2 x 3 x 3/16 in. Formed Angle Painted Only |
24, 30, 36, 40, 42, 44, 54, 60, 66, 72, 78 and 84-inch sizes |
3-1/2 x 3 x 1/4 in. Mill Angle Painted or Unpainted |
18, 24, 30, 36, 40, 42, 44, 54, 60, 66, 72, 78, 84, 90, 96, 102, 108, 114 & 120-inch sizes |
5 x 3-1/2 x 5/16 in. Angle Painted or Unpainted |
Available in 2-ft. thru 12-ft. sizes by the foot. |
|